Diamond Duo Rock Light
Two lights in one housing
The Diamond Duo puts six high-output Cree emitters on two separately switched channels. Channel one is the color you choose. Channel two is white. Run either on its own, or both together for maximum output.
Which rock light is for you
Diamond Duo
Two fixed jobs from one light: accent color plus functional white, or a primary beam plus a warning color. No controller. Each channel is one color, with no mixing, chasing or patterns.
Diamond RGB
24 addressable LEDs per light for color mixing, animation and sync with 2.0 and 2.5 whips, halos and RGB strip.
Axion RGB+W
Our highest output with a true dedicated white, daisy-chain wiring and app control on the RGB+W system.
How it is built
CNC-machined 6061-T6 aluminum housing, potted in our UV-stable clear resin that will not yellow. The dome of resin is what gives the light its wide spread. Designed, machined, assembled and tested in Huntersville, North Carolina. If one ever quits, it comes back here and we repair it.
- Six hand-selected Cree emitters, three per channel
- 6061-T6 billet housing, CNC-machined in Huntersville, NC
- UV-stable clear resin, IP69K rated, roughly 210° spread
- Self-regulates for heat to protect the emitters
- Serviceable, not disposable: we repair what we build
Specs
| Emitters | 6 Cree, 3 per channel |
|---|---|
| Output | Up to 2,243 lumens, White/White with both channels lit, measured at 18 in |
| Spread | Approximately 210° |
| Sealing | IP69K rated |
| Housing | CNC-machined 6061-T6 aluminum |
| Power | 12V DC, no controller |
| Lead | 12 ft shielded, two positives and a shared ground |
| Colors | Blue, Red, Amber, Green or Orange, each with white; or White/White |
| Sold | Each |
Wiring
Each light has two positive leads and one ground. Wire both positives to an on/off/on rocker on a fused switched source and you have both functions on one switch. No controller and no data line, so the Duo installs on any 12V vehicle, trailer or piece of equipment.
Heat
These lights get hot in extended use. They self-regulate for heat, and they run brighter when mounted to metal that can carry heat away. Use care when handling a light that has been on for a while.
- Bolt and Nut for mounting (1 per pod)
- Magnet for mounting (1 per pod)
- Strobe Module
- 3-pin raw wire
- Splitters
- Optional: Plug-n-Play Wiring Harness with Rocker Switch
No posts found